Exiting Scenario Mode; Figure 3-20: Message Box For Confirming Scenario Deletion; Figure 3-21: Confirmation Message Box For Exiting Scenario Mode - AudioCodes Mediant 600 User Manual

SIP User's Manual
3. Click the Delete Scenario File button; a message box appears requesting
confirmation for deletion.

Figure 3-20: Message Box for Confirming Scenario Deletion

4. Click OK; the Scenario is deleted and the Scenario mode closes.
Note:
3.1.8.7

Exiting Scenario Mode

When you want to close the Scenario mode after using it for device configuration, follow
the procedure below:

To close the Scenario mode:
1. Simply click any tab (besides the Scenarios tab) on the Navigation bar, or click the
Cancel Scenarios button located at the bottom of the Navigation tree; a message box
appears, requesting you to confirm exiting Scenario mode, as shown below.

Figure 3-21: Confirmation Message Box for Exiting Scenario Mode

2. Click OK to exit.
Version 6.2
You can also delete a Scenario using the following alternative methods:
•
Loading an empty dat file (see ''Loading a Scenario to the Device'' on
page 46).
•
Loading an ini file with the ScenarioFileName parameter set to no value
(i.e., ScenarioFileName = "").
47
3. Web-Based Management
February 2011