When Copying Onto Ohp Transparencies Or Thin Paper - Ricoh C4540 Operating Instructions Manual

D
Press [Custom Size].
E
Enter the horizontal size of the original with the number keys, and then
press [q] .
F
Enter the vertical size of the original with the number keys, and then press
[q] .
G
Press [OK].
H
Place the original, and then press the {Start} key.
I
When the copy job is finished, press the {Clear Modes} key to clear the set-
tings.
Note
❒ If you make a mistake in step
and then enter the value again.
❒ To register the custom size entered in step
press [Exit] in the confirmation screen.

When Copying onto OHP Transparencies or Thin Paper

When copying onto OHP transparencies or thin paper, select the type and size
of paper.
Important
❒ We recommend that you use specified OHP transparencies.
, press [Clear] or the {Clear/Stop} key,
E F
or
F
, press [Program] and then
Copying from the Bypass Tray
Draft 2006/03/07
2
37