Drive Clutch Cover - Bushing Removal - Polaris Trail Blazer Service Manual

Hide thumbs Also See for Trail Blazer:

Table of Contents

Drive Clutch Bushing Service

Drive Clutch Cover - Bushing Removal

1. Install main adapter (Item 8) on puller.

2. From outside of clutch cover, insert removal tool

(Item 3) into cover bushing.

3. With inside of cover toward vise, slide cover onto

4. Install nut onto puller rod and hand tighten. Turn

puller barrel to increase tension as needed.

5. Turn clutch cover counterclockwise on puller rod

until bushing is removed.

6. Remove nut from puller rod and set aside.

7. Remove bushing and bushing removal tool from

puller. Discard bushing.

Piston Pin Puller

Main Adaptor

Polaris Sales Inc.