Master Cylinder Disassembly; Master Cylinder Inspection - Polaris Trail Blazer Service Manual

Hide thumbs Also See for Trail Blazer:

Table of Contents

Master Cylinder Disassembly

1. Clean master cylinder and reservoir assembly. Make

sure you have a clean work area to disassemble brake

2. Place a shop towel under brake line connection at

master cylinder. Loosen banjo bolt; remove bolt and

sealing washers.

Brake fluid will damage finished surfaces. Do not allow

brake fluid to come in contact with finished surfaces.

3. Remove master cylinder from handlebars.

4. Remove cover and diaphragm from master cylinder

and dispose of the fluid properly.

5. Be sure vents in cover are clean and unobstructed.

6. Remove brake lever.

Master Cylinder

Polaris Sales Inc.