Drive Clutch Disassembly/Inspection - Polaris Trail Blazer Service Manual

Drive Clutch Disassembly
1. Using a permanent marker, mark the cover, spider,
and moveable and stationary sheaves for
reference. X marks on castings must be aligned.
2. Remove cover bolts evenly in a cross pattern, and
remove cover plate.
3. Inspect cover bushing (A). The outer cover bushing
is manufactured with a Teflon™ coating. Bushing
wear is determined by the amount of Teflon™
remaining on the bushing.
Cover Bushing Inspection:
Replace the cover bushing if more
brass than Teflon™ is visible on the
bushing. Refer to bushing replacement
in this chapter.
4. Inspect area on shaft where bushing rides for wear,
galling, nicks, or scratches.
assembly if worn or damaged.
5. Remove and inspect spring. (See page 6.11)
Polaris Sales Inc.
Replace clutch
6.15
CLUTCH
Drive Clutch Inspection
A
Inspect shaft
4/99