Table of Contents
Advertisement
MAINTENANCE
Drive Chain
7. Tighten the eccentric clamp bolts to specification.
WITH TRAILER HITCH -
CAUTION:DO NOT OVER-TIGHTEN ECCENTRIC
CLAMP BOLTS. PRE-MATURE BEARING FAILURE
MAY RESULT.
WITHOUT TRAILER HITCH -
8. Verify chain adjustment is correct after tightening
eccentric clamp bolts to specification.
9. Tighten caliper mounting bracket bolts 10-12 ft. lbs.
(14 - 17 Nm)
10.Reinstall chain guard (where applicable).
NOTE: Reposition chain guide to allow 1/8" (.3 cm)
clearance between sprocket and guide.
4/99
40 ft. lbs. (55 Nm)
30 ft. lbs. (41 Nm)
2.6
Eccentric Clamp With Hitch
Torque the nut
Eccentric Clamp Without Hitch
Torque the nut
Caliper Mount Bracket
10-12 ft. lbs
Polaris Sales Inc.
Advertisement
Table of Contents
Troubleshooting
