Coolant Level Inspection - Polaris Trail Blazer Service Manual

Coolant Level Inspection

Therecoverybottle, locatedontheleft sideof themachine,
must be maintained between the minimum and maximum
levels indicated on the recovery bottle.
With the engine at operating temperature, the coolant level
should be between the upper and lower marks on the
coolant reservoir. If not:
1. Remove reservoir cap. Inner splash cap vent hole
must be clear and open.
2. Fill reservoir to upper mark with Polaris Premium
60/40 Anti Freeze / Coolant or 50/50 or 60/40 mixture
of antifreeze and distilled water as required for freeze
protection in your area.
3. Reinstall cap.
NOTE: If overheating is evident, allow system to cool
completely and check coolant level in the radiator.
Polaris Sales Inc.
Recovery Bottle
Recovery
Bottle
2.3
MAINTENANCE
Cooling System
Gen II
Gen III
Recovery Bottle
Gen IV
4/99