Polaris Trail Blazer Service Manual page 247

Hide thumbs Also See for Trail Blazer:

Table of Contents

ES33PF, EH50PL Engine

Assembly, Cont.

6. Apply a light film of oil to the threads and flange

surface of the cylinder mounting bolts.

7. Install all four bolts finger tight. Rotate the engine and

position the piston at BDC.

NOTE: If cam chain is installed, hold it up while rotating

the engine to avoid damage to the chain, drive sprocket

teeth, or tensioner blade.

8. Tighten the cylinder bolts in three steps in a criss cross

pattern and torque to specifications.

9. Install the two 6mm bolts.

Cylinder Bolt Torque:

10mm - 46 ft. lbs. (6.348 kg-m)

6mm - 6 ft. lbs. (.828 kg-m)

Polaris Sales Inc.

Troubleshooting