Table of Contents
Advertisement
Transmission Disassembly, cont.
8. Remove the low gear and inner thrust washer.
9. Use a 1/2" wrench to rotate the low range bellcrank
and remove low range shift fork with dog gear.
NOTE: High/Reverse bell crank must be in neutral to re-
move low gear shift fork shaft.
10. Remove snap ring from front drive input shaft.
11. Remove output shaft and gear assembly along with
sprocket and chain, by tapping on shaft with a soft
faced hammer, from the back side of the gear case.
12. Use a 1/2" wrench to rotate high/reverse bell crank
and remove shift fork along with shafts.
Polaris Sales Inc.
Type V, Shaft / Chain Transmission
8.47
TRANSMISSION
4/99
Advertisement
Table of Contents
Troubleshooting
