Table of Contents
Advertisement
Steering Assembly, Exploded View, - 2x4 Models (Except '99 Trail Boss 250)
Inner rod ends beneath
lower post arm
Always use new bolts
upon reassembly
30 ft. lbs.
41 Nm)
Polaris Sales Inc.
Steering Post
Steering Post Arm
Bolt pointing UP
25 ft. lbs.
Always use new
(35 Nm)
cotter pins upon
reassembly.
BODY / STEERING / SUSPENSION
NOTE: 2x4 Models (Except 1999 Trail Boss 250):
To avoid damage to tie rods and other steering
components, be sure to install tie rod end stud in
the proper direction. Both sides must be installed
as shown, with inner rod end positioned beneath
the lower steering post arm, and outer rod end
stud pointing DOWN through the strut casting.
23-24 ft. lbs.
(32-33 Nm)
Spacer (one
each side)
Rod end on top of
strut casting
5.11
Loctite™ 242
8 ft. lbs.
(11 Nm)
99/00 ATV Update
12/99
Advertisement
Table of Contents
Troubleshooting
