Rear Drive Shaft Disassembly (Dual Cv Joint Style) - Polaris Trail Blazer Service Manual

FINAL DRIVE
Rear Drive Shaft Service (Dual CV Joint Style)

Rear Drive Shaft Disassembly (Dual CV Joint Style)

1. Remove clamps from rubber boot(s) using the
proper boot clamp pliers.
CV Boot Clamp Pliers:
Earless Type 8700226
2. NOTE: Photo at right is shown without shaft for
clarity. Wipe grease away from recess in CV joint
inner hub to locate snap ring.
3. Open the snap ring using a snap ring pliers or small
needle nose pliers. Tap CV housing off shaft with a
soft faced hammer while holding snap ring open.
Polaris Sales Inc.
Snap ring
Tap CV Housing
Off Shaft
7.65
Snap ring located in
recessed area
Spread ends of snap ring
to remove joint from shaft
4/99