Polaris Trail Blazer Service Manual page 522

Transmission Disassembly, cont.
10. Note position of shim washers and thrust button.
11. Remove shafts as an assembly.
12. Clean all components in a parts washer and inspect
for wear.
13. Inspect engagement dogs of gears and replace if
edges are rounded.
14. Inspect gear teeth for wear, cracks, chips or broken
teeth.
15. Remove seals from transmission case.
NOTE: New seals should be installed after the transmis-
sion is completely assembled.
16. Inspect bearings for smooth operation. Check for
excessive play between inner and outer race.
Polaris Sales Inc.
Type Vl, Shaft Ride Transmission
8.57
TRANSMISSION
4/99