Polaris Trail Blazer Service Manual page 80

16. Middle Axle Bearings (6x6)
17. Swing Arm
Bushings
16. Rear Axle
Bearing
Ill. Item
#
15 Transmission
Output Shaft
16 Rear and Middle
Axle Bearings
(6x6)
17 Swing Arm
Bushings and
Center Swing Arm
Housing (6x6)
18 Chain Adjusters
(Center and Front
Eccentrics)
19 Rear Strut (6x6)
* More often under severe use, such as wet or dusty conditions
Semi-annually or 50 hours of operation (refer to Maintenance Schedule for additional information)
¡
Annually or 100 hours of operation (refer to Maintenance Schedule for additional information)
©
Grease conforming to NLGI No. 2, such as Polaris Premium All Season Grease, Conoco Superlube M or
¢
Mobilegrease Special
Polaris Sales Inc.
15. Output shaft support
bearing grease fitting
17. Center Swing
Arm Housing (6x6)
Lube Rec.
Polaris All Season Locate grease fitting on transmission output shaft
Grease¢ and grease with grease gun.
Polaris All Season Locate grease fitting on eccentric and grease with
Grease¢ grease gun.
Polaris All Season Locate grease fitting on swing arm and grease with
Grease¢ grease gun.
Polaris All Season Locate grease fitting on center eccentric and
Grease¢ grease. Locate grease fitting on front eccentric (side
opposite chain) and grease.
Polaris All Season Locate fitting on rear strut and grease with grease
Grease¢ gun.
Forward
18. Center and Front Eccentrics
19. Rear Strut
Stabilizer (6x6)
Method
2.
MAINTENANCE
Lubrication
Frequency*
Semi-annually
¡
Semi-annually
¡
Semi-annually
¡
Semi-annually
¡
Semi-annually
¡
4/99