Cylinder Head Inspection - Polaris Trail Blazer Service Manual

Hide thumbs Also See for Trail Blazer:

Table of Contents

Engine Disassembly, Cont.

2. Loosen each of the four cylinder head bolts

evenly 1/8 turn each time in a criss-cross

pattern until loose.

3. Remove bolts (A) and tap cylinder head lightly

with a plastic hammer until loose. CAUTION:

Tap only in reinforced areas or on thick parts of

cylinder head casting to avoid damaging

4. Remove cylinder head and head gasket.

New head gasket must be installed with sealant

facing upward.

Cylinder Head Inspection

1. Thoroughly clean cylinder head surface to remove

all traces of gasket material and carbon. CAUTION:

Use care not to damage sealing surface.

Polaris Sales Inc.

ES33PF, EH50PL Engine