Pvt Disassembly - Polaris Trail Blazer Service Manual

Hide thumbs Also See for Trail Blazer:

Table of Contents

PVT Disassembly

NOTE: Some fasteners and procedures will vary. Refer to the appropriate parts manual for proper fasteners and

fastener placement. (See pages 6.7-6.9).

1. Remove seat.

2. Remove or loosen rear cab fasteners as necessary to

gain access to PVT outer cover.

3. Remove PVT air outlet duct hose.

4. Remove outer cover screws and clamps. Refer to

pages 6.7-6.9.

5. Mark the drive belt direction of rotation and remove

The belt is normally installed so the

numbers can be easily read. To remove drive belt,

apply brake, pull upward and rearward on belt to open

driven clutch sheaves, push down on belt to hold

sheaves open, and slip belt over driven clutch outer

6. Remove drive clutch retaining bolt and remove drive

clutch using puller.

Drive Clutch Puller PN 2870506

Polaris Sales Inc.