Table of Contents
Advertisement
BRAKES
Front Caliper
Installation
1. Install caliper on hub strut, and torque mounting bolts.
Front Caliper Mounting Bolt Torque
18 ft. lbs. (2.48 kg-m)
2. Install brake line and tighten securely with a line
wrench.
3. Install the adjuster screw and turn until stationary pad
contacts disc, then back off 1/2 turn.
4. Follow brake bleeding procedure outlined on pages
9.8-9.9.
5. Install wheels and torque wheel nuts to specification.
Front Wheel Nut Torque
15 ft. lbs. (2.07 kg-m).
NOTE: If new brake pads are installed, it is recommended
that a burnishing procedure be performed to extend pad ser-
vice life and reduce noise. Start machine and slowly in-
crease speed to 30 mph. Gradually apply brakes to stop ma-
chine. Repeat procedure 10 times.
4/99
9.22
Polaris Sales Inc.
Advertisement
Table of Contents
Troubleshooting
