Driven Clutch Moveable Sheave - Bushing Installation - Polaris Trail Blazer Service Manual

CLUTCH
Driven Clutch Bushing Service

Driven Clutch Moveable Sheave - Bushing Installation

1. Working from the top, insert adapter number ten
onto puller. See illustration at right.
2. Start new bushing evenly in moveable sheave.
Apply Loctite 680 retaining compound to the back
side of new bushing.
3. Install sheave onto puller with new bushing upward
as shown. Install adaptor number two.
4/99 6.36
Adapter
Number Ten
Polaris Sales Inc.