Transmission Disassembly, Cont.
19. Using 2 1/8" wrench (PN 2871701) unscrew the
front drive housing from the transmission casting
until O-ring is exposed 1/2" (13mm).
NOTE: Do not attempt to unscrew the front drive
housing completely at this time.
20. Remove bottom access plate.
21. Bend the lock plate tab away from ring gear retaining
bolt.
22. Using a strap wrench on splines to hold shaft,
remove front output ring gear retaining bolt, lock
tab washer, and flat washer.
Polaris Sales Inc.
Type IV, Shaft Drive Transmission
Flat Washer
Lock Plate
8.29
TRANSMISSION
Ring Gear
4/99