Keypad / Display - Emerson Unidrive HS72 Control Getting Started Manual

4.2

Keypad / display

4.2.1 Understanding the display
The keypad can only be mounted on the drive.
4.2.2 KI-Keypad
The KI-Keypad display consists of two rows of text. The upper row shows the drive status or the
menu and parameter number currently being viewed. The lower row of the display line shows the
parameter value or the specific trip type. The last two characters on the first row may display special
indications. If more than one of these indications is active then the indications are prioritized as
shown in Table 4-1.
When the drive is powered up the lower row will show the power up parameter defined by Parameter
Displayed At Power-up (11.022).
Figure 4-1 KI-Keypad
The red stop
NOTE
Table 4-1 Active action icon
Active action icon
or
Unidrive M702 / HS72 Control Getting Started Guide
Issue Number: 2
button is also used to reset the drive.
Description
Accessing non-volatile media card
Alarm active
Keypad real-time clock battery low
Drive security active and locked or
unlocked
Motor map 2 active
User program running
Keypad reference active
1. Escape button
2. Start reverse (Auxiliary button)
3. Start forward
4. Navigation keys (x4)
5. Stop / Reset (red) button
6. Enter button
Row
(1=top)
1
1
1
1
2
3
4
Priority
in row
1
2
3
4
1
1
1
15