Figure 3-4 Removal And Installation Of A Keypad - Emerson MP25A4 User Manual

Safety Product Mechanical
Information information Installation

Figure 3-4 Removal and installation of a keypad

To fit, align the MP-Keypad and press gently in the direction shown until
it clicks into position (A).
To remove, while pressing the tabs inwards (B), gently lift the MP-
Keypad in the direction indicated (C).
NOTE
The keypad can be installed / removed while the drive is powered up and
running a motor, providing that the drive is not operating in keypad
mode.
16
Electrical Getting Basic
installation started parameters
C
A
B
www.controltechniques.com
Running the SMARTCARD
Optimization
motor operation
B
Onboard Advanced Technical
Diagnostics
PLC parameters data
Mentor MP User Guide
UL
information
Issue: 3