Installation; Mechanical Installation; Installation Of Vario Unit; Screen Rotation - LXNAV LX Zeus Mobile User Manual

12 Installation

12.1 Mechanical installation

As the larger unit dimensions does not match air norm standard, a new cut out in the panel should be
made. There are two ways how to prepare the panel.
The first option is to buy a new panel from the manufacturer, and the second solution is to upgrade your
existing panel. A panel upgrade can also be done by user; in that case some experience in fiber glass
technology will help. Instructions how to rebuild the panel can be obtained from LX Navigation.
Every unit also comes with an iron template which makes it possible to manufacture LX Zeus cut out by
hand. In case of a CNC solution, please ask for .dwg file.
12.1.1

Installation of Vario unit

The unit occupies one 57 mm standard cut out. The maximal dimensions of the unit are 60x60 mm and
don't exceed dimensions of classic pneumatic instruments. In case of space problems, the unit can be
separated into two parts, which are connected via a cable.
Respect labels near pneumatic connectors, during pneumatic tube connection process.

12.2 Screen rotation

Software rotation can be easily done in SETUP / SERVICE menu, when a password 9109 is entered.
Buttons must be rotated by hand. Follow procedure below:
1. Open the unit (remove all screws and a cover)
2. Move rounded rubber to the middle
3. Take out the button and rotate it to the proper position
4. Put button back on blue button (be careful that blue button is inside of the black hose)
5. Put rounded rubber back to the first position (be careful on side with Rotary knobs rubber must
not be fully pushed to the end)
LX Zeus v 3.0
Reinstallation after panel upgrade
Note!
25.6.2014
- 76 -