Final Glide Calculation - LXNAV LX Zeus Mobile User Manual

Auto next X becauseR1 is
more than 9.5 km

11.2.7 Final glide calculation

The final glide calculation is based on the following inputs:
Actual MC setting
Wind
Polar
Bugs
Ballast
Safety altitude (reserve)
The final glide is indicated in the graphics page. As the
final glide box has the nature of a display indicator it can
be moved over the display and also custom colours can
be assigned. (–) figures mean below and (+) above final
glide, both in meters resp. in ft. The final glide situation is
also present in the first navigation Subpage of all three
navigation modes. In case of flying a task, final glide
profile will be displayed until finish.
In Task mode the final glide is calculated from actual
position until finish (overall not over flown turn points).
LX Zeus v 3.0
Note!
Final glide may be
also visualized
NAV BOX.
Note!
Auto next because R1
is less than 9.5 km
as
25.6.2014
- 70 -