Table of Contents
Advertisement
LX9000 Version 2.6
You have to confirm restarting of the task. Once the task is restarted navigation will be
changed back to start point.
7.2.3
Over Turn Point
When a turn point observation zone is reached the message
and the task will auto advance to the next turn point if the Auto next option was selected
(see Chapter 5.7.3).
When the Auto next option was not selected the message NEXT will be displayed. Press
the associated button to advance to the next turn point. If for some reason you missed this
message you can always advance the task to the next turn point by pressing the NEXT
button. Go to task mode. In the upper row the NEXT button is shown. Press this button
and navigation will be advanced to next turn point.
In case you did not reach turn point and you wish to continue navigation towards the next
point anyway press the NEXT button.
A message will appear. If you confirm this with YES the task will be advanced to the next
turn point and it will recalculate the task taking the optimal fix as the task point.
7.2.4
Entering Assigned Area
Most probably when entering an assigned area auto advance is going to be turned off. The
"Inside zone"
message
row. Pressing the CLOSE button will dismiss the inside zone message. The task will be
auto advanced to the next point when leaving the assigned area. If you want to auto
advance to the next turn point earlier you may always press the NEXT button in task mode
(see 7.2.3).
If NEXT is pressed the task is advanced to the next turn point.
When flying in an assigned area it is NOT important when you will advance to next
turn point. The LX9000 is always taking into account the most optimal fix inside
the assigned area for the total distance calculation.
7.2.5
Moving Point Inside Assigned Area
If at least one observation zone is defined as an assigned area, it is possible to move the
point within this area. Moving the point will increase or decrease the total task length.
Select the MOVE action within task mode. A dialogue with the current assigned area will be
shown.
will be shown and buttons CLOSE and NEXT will appear in the lower
Page 102 of 130
September 2011
"Inside zone"
will be displayed
Advertisement
Table of Contents
