How To Set Up Channel Scanner - Keysight N9913A User Manual

Channel Scanner (Option 312)

How to Set Up Channel Scanner

Figure 22-1 Display Example: Measure 5 Channels Spaced 2 MHz Apart
How to Set Up Channel Scanner
This section briefly reviews the steps in setting up a channel scan
measurement. If you are not familiar with this process or would like more
information, refer to
1. Define some channels (refer to
2. Select
3. Modify scale and specify color bar coding—Modify the scale and assign
372
"How to Define a Channel and Use Channel
Scanner").
a. Select a Scan Mode—choose:
— Range Specify total channels, channel spacing or
— Custom List
b. Then modify channels based on the selected scan mode
Display Type—choose:
— Bar ChartV or
— Bar ChartH or
— Channel Pow or
— Strip Chart or
— Chart Overlay or
— Scan&Listen
colors to low and high power channels (bars):
"How to Define a Channel and Use Channel
Specify a list of channels from an editor
Keysight N9927-90001 User's Guide
Scanner".