Flywheel And Starter Motor Installation (Te-Txc) - Husqvarna TE 250-310 2012 I.E. Workshop Manual

ENGINE REASSEMBLY
TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA

Flywheel and starter motor installation (TE-TXC)

Clean flywheel rotor to remove any debris suspended in swirling oil and captured
by the magnets. Fit the tab (1) to the crankshaft.
Lubricate needle roller bearing (2) and thrust ring (3) with engine oil and install
them, making sure the thrust ring slots are pointing outwards.
3
2
H11049
Lubricate the freewheel (4) with engine oil and refit it.
4
H11051
Workshop Manual Ed. 12-2011
H.39