Husqvarna TE 250-310 2012 I.E. Workshop Manual page 353

TIGHTENING TORQUE FIGURES
TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA
X
Section
Tighten all nuts and screws to the specified torque using a torque wrench. If not tightened securely, a nut or a screw
might become damaged or work itself loose, causing damage to motorcycle and injury to rider. An overtightened nut
or screw might become damaged, its thread might strip, or the nut/screw might fail and work itself loose. Listed in
the table are the tightening torque figures for the most important nuts and screws, which have determined in accord-
ance with thread diameter, pitch and specific application. These figures are obtained after cleaning the threads with
solvent.
Workshop Manual Ed. 12-2011
X.1