TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA
1
2
3
4
5
8
SETTINGS AND ADJUSTMENTS
Valve clearance adjustment (TC)
Remove saddle and tank as outlined in the relevant paragraphs.
-
Remove the connector (1) from the coil (2).
-
Loosen the two screws (3), remove coil (2) and retaining bracket (4), and
then remove the spark plug.
NOTE: During refitting, check that the gasket (5) is correctly positioned;
the reference lug (6) must correspond with the retaining bracket
(4) gap (7).
H10948
6
7
H10949
Loosen the four screws (8) of the head cover and remove the head cover (9).
9
8
H10950
D.7
Workshop Manual Ed. 12-2011