Securing The Starter Motor/Solenoid Starter Cable (Te-Txc); Securing The Engine Ground To Chassis And Engine Ground To Battery Cables (8) (Te-Txc); Battery Negative Cable Routing (Te-Txc) - Husqvarna TE 250-310 2012 I.E. Workshop Manual

ELECTRICAL SYSTEM
TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA
• Position of control unit (5) and voltage regulator (6)
(TE – TXC)
Electronic control unit installed with the flat side down.
Voltage regulator installed over the electronic control unit.
Coat voltage regulator with heat grease.

• Securing the starter motor/solenoid starter cable (TE-TXC)

Connect the starter motor/solenoid starter cable (7) as shown in the figure.
• Securing the engine ground to chassis and engine ground to battery
cables (8) (TE-TXC)
The engine ground to chassis and engine ground to battery cables are secured
to the timing chain tensioner screw.

• Battery negative cable routing (TE-TXC)

Routing of engine ground to battery negative cable (8).
8
H00924
Workshop Manual Ed. 12-2011
M.47