Fuel Pump Removal (Tc) - Husqvarna TE 250-310 2012 I.E. Workshop Manual

TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
2
Workshop Manual Ed. 12-2011
GENERAL PROCEDURES
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA

Fuel pump removal (TC)

- Remove the fuel tank as described in the relevant paragraph.
- Remove the tank filler cap and pour the fuel contained in the tank into a ves-
sel of adequate capacity.
- Use an Allen wrench to loosen the 6 screws (1) and remove the pump (2).
H00648
On assembly, make sure that the pump O-ring (3) is correctly po-
sitioned in its seat.
H02339
E.16