Kayaba Front Fork Adjustment - Husqvarna TE 250-310 2012 I.E. Workshop Manual

TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
a)
D
+
H09087
SETTINGS AND ADJUSTMENTS
TXC 250 - 310 2012 I.E. USA

KAYABA front fork adjustment

- COMPRESSION (Fig. a)
(TC - TXC: TOP ADJUSTER; TE: LOWER ADJUSTER)
A
KAYABA: -9 clicks (TC EU - TXC);
KAYABA: -12 clicks (TE);
- KAYABA: -10 clicks (TC 250 USA).
To reset the standard setting, turn cap nut (A) clockwise to reach the fully closed
position; then, turn it back by the mentioned clicks. In order to obtain a smooth
braking action, turn the adjuster counter clockwise. Vice versa to obtain a harder
braking action.
TC - TXC
- REBOUND (Fig. b)
(TC - TXC: LOWER ADJUSTER; TE: TOP ADJUSTER)
KAYABA: -13 clicks (TC EU - TXC);
KAYABA: -8 clicks (TE);
KAYABA: -12 clicks (TC 250 USA).
To reset standard setting, turn adjuster (C) clockwise to reach the fully closed
position; then, turn it back by the mentioned clicks. In order to obtain a smooth
braking action, turn the adjuster counter clockwise. Vice versa to obtain a harder
braking action.
- BLEEDING (Fig. a/b) (to carry out after each competition, or monthly).
Set the motorcycle on a central stand, release the fork fully extended and loosen
the bleed valve (D). Once this operation is over, tighten the valve.
NOTE: Never force the adjuster screws beyond the maximum open and
closed positions.
C
D.29
TC-TXC
H11259
Workshop Manual Ed. 12-2011