Clutch Disassembly - Husqvarna TE 250-310 2012 I.E. Workshop Manual

TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA
ENGINE DISASSEMBLY

Clutch disassembly

- Remove the six retaining screws (2) and the clutch cover (3).
- Using an 8 mm wrench, unscrew the six screws (4) securing the clutch springs.
Remove springs, pressure plate (5) with bearing (6) and clutch actuator plate
(7).
F.29
Workshop Manual Ed. 12-2011