Camshaft Removal (Tc) - Husqvarna TE 250-310 2012 I.E. Workshop Manual

TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
1
1
2
INTAKE
3
Workshop Manual Ed. 12-2011
ENGINE DISASSEMBLY
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA

Camshaft removal (TC)

1
- Remove the six retaining screws (1) of the alternator cover (2) (4 mm Allen
wrench) and remove the cover with its gasket.
2
1
H10980
- With a 17mm wrench, position the piston on the TDC at the end of the com-
pression phase. In this condition, the two engraved reference marks (3) on
the gears of the camshafts are positioned on the same axle although they
are diametrically opposed.
1
H10981
H10989
OUTLET
3
3
H11149
3
F.8
H10990