Husqvarna TE 250-310 2012 I.E. Workshop Manual page 79

TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
6
9
H02216
GENERAL PROCEDURES
TXC 250 - 310 2012 I.E. USA
TC
8
(TC)
- Disconnect the fuel hose (7) from the throttle body.
- Lift the tank and disconnect the fuel pump connector (8) from the main wiring
harness.
H10016
TE-TXC
7
(TE-TXC)
- Close the two taps (7) and (8) and connect the hose (9).
- Disconnect connector (6) of the reserve sensor.
- Lift the tank and disconnect the hose (10) from the fuel pump outlet fitting
(11) in the bottom section of the tank.
- Disconnect the fuel pump connector (12) from the main wiring harness.
H10018
TE-TXC
8
H10019
- Slide out the tank (13).
13
Carefully disconnect the fuel hoses from the throttle body or from
the fuel pump to prevent damage to the quick coupling.
7
11
12
E.15
TC
H10017
TE-TXC
10
H10020
Workshop Manual Ed. 12-2011