Removing The Starter Motor; Positioning The Engine At Ignition Top Dead Center - Husqvarna FC 350 2014 Repair Manual

17 ENGINE
17.3.8

Removing the starter motor

17.3.9

Positioning the engine at ignition top dead center

O
-
Remove screws and take off cover @.
-
Take off the gasket.
-
Remove torque limiter (D.
8.
-
Remove screws
-
Remove the alternator cover.
0
-
Remove screws and take off the starter motor.
-
Turn the crankshaft counterclockwise until markings
located flush above the flat areas Ce) of the camshafts.
133
O
on the cylinder head are