Camshaft Removal (Te - Txc) - Husqvarna TE 250-310 2012 I.E. Workshop Manual

TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
1
2
4
Workshop Manual Ed. 12-2011
ENGINE DISASSEMBLY
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA

Camshaft removal (TE - TXC)

- Remove the six retaining screws (1) of the alternator cover (2) and remove
the cover with its gasket.
1
1
H10977
- To remove the gear sensor (3), loosen the two screws (4) and its pushrod
and spring.
3
H10978
- Using a 17 mm wrench, bring the piston to T.D.C. at the end of the compres-
sion stroke (in this condition, the two holes (5) and the two marks (6) on the
gears must be positioned as shown in the figure).
- Cover parting line "A" is visible through the holes (4).
H10979
F.6
INTAKE
EXHAUST