Neutral Sensor Installation (Te-Txc) - Husqvarna TE 250-310 2012 I.E. Workshop Manual

ENGINE REASSEMBLY
TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA

Neutral sensor installation (TE-TXC)

Refit pin (1) and spring (2).
Check the O-ring (3) of the sensor (4).
Refit the sensor (4) and tighten the screws (5) using an 8 mm wrench (5.5 Nm,
0.55 Kgm, 4 ft/lb, Loctite 243).
Workshop Manual Ed. 12-2011
H.54