Fuel Pump Connector Position (Tc); Securing The Wiring (Tc); Securing The Engine Stop Button Cable (Tc) - Husqvarna TE 250-310 2012 I.E. Workshop Manual

TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA
21
4
2
1
5
8
ELECTRICAL SYSTEM

• Fuel pump connector position (TC)

Position the fuel pump connector (21) as shown.
H10143

• Securing the wiring (TC)

- Fasten the alternator cable to the clutch tube by means of the clamps (1).
- Fasten the condenser connector (2) to the support bracket by means of the
clamp (3).
- Fasten the harness to the chassis with the clips (4) as shown.
- Fasten the cables coming from the front part of the bike to the chassis by
means of the openable clamp (5).
- Fasten the front cables with a clamp (6).
3
H10144
6
H10146

• Securing the engine stop button cable (TC)

9
Secure the engine stop button cable (8) with two clips (9).
H10145
M.43
H11136
Workshop Manual Ed. 12-2011