Camshaft Installation (Tc) - Husqvarna TE 250-310 2012 I.E. Workshop Manual

TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
2
4
5
ENGINE REASSEMBLY
TXC 250 - 310 2012 I.E. USA

Camshaft installation (TC)

Secure a dial gauge (1) to the spark plug hole.
1
Turn the crankshaft manually until bringing the piston to Top Dead Centre.
Clean and refit the intake camshaft (2) and the outlet camshaft (3) ensuring that
the gears are positioned as the figure shows.
Before refitting the camshafts, carefully clean the seat of shafts and
mount, then lubricate with engine oil.
Make sure that the decompressor is not locked.
H11072
The engraved reference marks (4) must be positioned as shown.
3
INTAKE
4
4
H11073
Make sure that the plugs (5) are in the correct position on the mount (6).
6
5
H11075
H.51
OUTLET
4
H11074
Workshop Manual Ed. 12-2011