Right Crankcase Assembly - Husqvarna TE 250-310 2012 I.E. Workshop Manual

ENGINE REASSEMBLY
TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA

Right crankcase assembly

Refit the oil pump drive gear (1) and its shaft (2).
Check the O-rings of the oil suction stub (3) and replace them if needed.
Refit the oil suction stub (3).
Refit the centring bushings (4).
Refit the gasket (5).
Manually check for correct installation and operation of the pump (6) and make
sure the crankshaft sealing ring (7) is in the correct position.
Workshop Manual Ed. 12-2011
H.58