Ignition And Starter System (Te-Txc) - Husqvarna TE 250-310 2012 I.E. Workshop Manual

TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
13
12
14
34
35
36
30 29 28
Key
1. Electronic control unit
2. Control unit interface
3. Coolant temperature sensor
4. HT coil
6. Fuel pump
7. Electric fan relay
8. Ignition switch
9. Lambda sensor
10. Cooling fan
12. DC relay
13. L.H. switch
16. Battery
17. Solenoid starter
18. Starter motor
19. Voltage regulator
ELECTRICAL SYSTEM
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA

Ignition and starter system (TE-TXC)

The engine injection and starter system is controlled by the control unit (ECU);
by means of a series of sensors, the ECU controls the status of the engine and
of the surrounding environment at each given moment.
The sensors are: a crankshaft position sensor (pick-up), a temperature sensor
of the filter box ambient air, and a group of sensors (MAQS) on the throttle body
that provide information about pressure, air temperature, and position of the
throttle opening.
Moreover, the ECU uses a lambda probe for the constant adjustment of the air-
fuel ratio (Euro3 mode)
11 10 9 8
27 26 25 24
20. Alternator
21. Gear sensor
22. M.A.Q.S. (38+39+40)
23. Power relay
24. Fuses
25. Injector
26. R.H. switch
37. Spark plug
38. Pressure sensor (22)
39. Throttle position sensor (22)
40. Air temperature sensor (22)
37
7 6 5 4 3
39
40
38
23 22 21
M.19
2 1
20 19 18 17
Workshop Manual Ed. 12-2011
TE
31
32
33
16 15
H10112