Flywheel And Starter Motor Installation (Te-Txc) - Husqvarna 2013 TC 250R Workshop Manual

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
2
Workshop Manual Ed. 07-2012
ENGINE REASSEMBLY
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA

Flywheel and starter motor installation (TE-TXC)

Clean flywheel rotor to remove any debris suspended in swirling oil and captured
by the magnets. Fit the tab (1) to the crankshaft.
Lubricate needle roller bearing (2) and thrust ring (3) with engine oil and install
them, making sure the thrust ring slots are pointing outwards.
3
H11049
Lubricate the freewheel (4) with engine oil and refit it.
4
H11051
H.38