Air Filter Check (Tc); Air Filter Cleaning - Husqvarna TE 250-310 2012 I.E. Workshop Manual

TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
Workshop Manual Ed. 12-2011
SETTINGS AND ADJUSTMENTS
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA

Air filter check (TC)

Turn the rear fixing (1) counter clockwise, remove it and extract the saddle re-
leasing it from the front retaining screw.
Remove the screw (3), remove the complete air filter (4) and separate filter (5)
from rear chassis (6).

Air filter cleaning

Wash the filter with a specific detergent (see "Capacities" table in Section A)
then dry it fully (wash filter with gasoline only in case of need). Plunge the filter
in special oil for filters (see "Capacities" table in Section A), then wring it to drain
superfluous oil.
Do not use fuel or a low flash-point solvent to clean the filtering
element. A fire or explosion could result.
Clean the filtering element in a well ventilated area and do not allow
sparks or flames anywhere near the working area.
D.20