Slider Removal; Kick Start Disassembly - Husqvarna TE 250-310 2012 I.E. Workshop Manual

TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
Workshop Manual Ed. 12-2011
ENGINE DISASSEMBLY
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA

Slider removal

- Use a 5 mm Allen wrench to loosen the screw (1) and remove the slider
(2).

Kick start disassembly

- Release the spring (1) from the casing (2) and remove the complete shaft
assembly (3). Be careful not to lose the washer (11) located on the crank-
case.
F.32