GENERAL PROCEDURES
TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA
Electronic control unit removal CDI
TE-TXC
Remove: saddle and fuel tank as described in the relevant paragraphs.
(TE-TXC)
1
Detach the connector (1) from the CDI electronic control unit (2) and take the
control unit together with its vibration mount out of the chassis.
H10023
TE-TXC
1
2
H10024
TC
(TC)
1
Unhook the support elastic (1) then detach the connector (2) and remove the
control unit (3).
2
H10025
TC
2
3
H10026
Workshop Manual Ed. 12-2011
E.19