Clutch - Husqvarna TE 250-310 2012 I.E. Workshop Manual

ENGINE OVERHAUL
TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA

Clutch

Inspect all clutch components to make sure they are in the best conditions.
Clutch plates should show no signs of bluing, scoring or distortion. Measure the
thickness of friction plates.
Plate thickness when new: 3.0 mm (0.1181 in.).
Service limit: 2.9 mm (0.1141 in.).
Clutch pack thickness: 29.4 mm (1.1574 in.).
Place each (friction and steel) plate on a surface plate and check for distortion
using a feeler gauge; Use a feeler gauge.
Service limit: 0.2 mm.
Workshop Manual Ed. 12-2011
G.15