Crankshaft; Crankshaft Straightness - Husqvarna TE 250-310 2012 I.E. Workshop Manual

TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
Workshop Manual Ed. 12-2011
ENGINE OVERHAUL
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA

Crankshaft

Main journals should show no scoring or scuffing. Threads, keyways and
splines must be in good condition.

Crankshaft straightness

Place the crankshaft (1) on a stand (2) with two dial gauges (3) positioned on
the journals.
Turn the crankshaft and measure runout.
If the detected measure exceeds 0.04 mm (0.0016 in.) replace
the crankshaft.
Crankshaft
G.14
STANDARD
< than 0.02 mm
(0.00078 in.)