Rear Brake - Husqvarna TE 250-310 2012 I.E. Workshop Manual

TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA

Rear brake

Type ................................................................... floating disc, ø 9.45 in. "Wave"
type with hydraulic control and floating caliper
Rims
Front ..................................................................................in light alloy: 1,6x21"
Rear (TE, TXC) ................................................................in light alloy: 2,15x18"
Rear (TC) .........................................................................in light alloy: 1,85x19"
Tires
Front
(TE -TXC) ...........................................................................................90/90x21"
(TC) ................................................................................................80/100 x 21"
Rear
(TE-TXC) ..........................................................................................120/90x18"
(TC) ..................................................................................................100/90x19"
(TE USA) ..........................................................................................140/90x18"
Cold tire pressure
(front TC) ..........................................................0,9÷1,0 Kg/cm
(front TE-TXC) (*) ............................................0,9÷1,0 Kg/cm
(front TE) (%) ....................................................................1,1 Kg/cm
(rear TC) ........................................................... 0,8÷0,9 Kg/cm
(rear TE-TXC) (*) ............................................. 0,8÷0,9 Kg/cm
(rear TE) (%) .....................................................................1,0 Kg/cm
(*) In case of racing use - (%) Road use
Electrical components location (TC)
The ignition system includes the following elements:
- Generator on the inner side of L.H. crankcase half cover;
- Electronic ignition coil under the fuel tank;
- Electronic control unit under the fuel tank;
- Spark plug on cylinder head;
- M.A.Q.S. sensor
- Condenser on the left of rear chassis.
Electrical components location (TXC)
The ignition system includes the following elements:
- Generator on the inner side of L.H. crankcase half cover;
- Electronic ignition coil under the fuel tank;
- Electronic control unit under the fuel tank;
- Voltage regulator under the fuel tank;
- Spark plug on cylinder head;
- 12V-450W starter motor behind the engine cylinder;
- Solenoid starter on the left of rear chassis;
- M.A.Q.S. sensor (pressure, throttle position, air temperature) on throttle
body.
The electrical system includes the following elements:
- 12V-6Ah battery under the saddle;
- Electric fan relay on right side of chassis:
- Electric fan;
- Two 15A and 20A fuses on right side of rear chassis;
- Coolant temperature sensor;
- Lambda sensor;
- Fuel pump inside the fuel tank.
- Fuel and reserve indicator.
GENERAL INFORMATION
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA
(12,8÷14,2 Psi)
2
(12,8÷14,2 Psi)
2
(15,6 Psi)
2
(11,4÷12,8 Psi)
2
(11,4÷12,8 Psi)
2
(14,2 Psi)
2
A.5
Workshop Manual Ed. 12-2011