Electric Cooling Fan Removal (Te-Txc); Secondary Drive Chain Removal - Husqvarna TE 250-310 2012 I.E. Workshop Manual

TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
2
1
1
GENERAL PROCEDURES
TXC 250 - 310 2012 I.E. USA

Electric cooling fan removal (TE-TXC)

- Remove saddle, fuel tank and scoops (in this order) as outlined in the relevant
paragraphs.
- Disconnect the connector (1).
- Loosen the screw (2) and remove the electric fan (3).

Secondary drive chain removal

The following procedure applies to both O-ring chains and chains without O-
rings:
- Remove: screws (1), sprocket guard (2), clip (3), master link (4) and chain
(5).
H02226
E.23
H02344
Workshop Manual Ed. 12-2011