Refitting Of The Head Cylinder Cover, Spark Plug, Coil (Tc) - Husqvarna TE 250-310 2012 I.E. Workshop Manual

TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
4
4
4a
2
5
8
ENGINE REASSEMBLY
TXC 250 - 310 2012 I.E. USA

Refitting of the head cylinder cover, spark plug, coil (TC)

- Fit the central retaining gasket (1).
1
H11086
4
- Fir the cover (3) on the head (2) with the respective gasket.
- Tighten the screws (4) to a 8 Nm - 0.8 Kgm - 5.9 ft/lb torque.
3
During the refitting, fit the longest screw (4a) on the water pump
side.
- Install the ignition spark plug (10÷12 Nm, 1÷1.2 Kgm, 7.4÷8.9 ft/lb).
H11087
- Make sure that the gasket (5) is correctly fitted; the reference lug (6) must
correspond with the retaining bracket (8) gap (7).
- Install the coil (9) on the head.
- Tighten the screws (10) with a 6 Nm, 0.6 Kgm, 4.43 ft/lb torque.
6
8
7
H11088
11
9
10
H.57
H11089
Workshop Manual Ed. 12-2011