FUEL INJECTION SYSTEM
TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA
Fuel pump test (TC)
Remove the pump as described in Section "E".
A: fuel reserve sensor
Make sure there is no fuel left in the sensor and then set the meter to the
"Impedance" scale and measure across the BLUE and WHITE wires. Cor-
rect value is as follows: 1.3 KOhm (+/- 10%) at 20 °C.
B: pump operation
Connect the RED (+) and BLACK (-) wires to a power supply unit with con-
stant 12V output and make sure that the pump runs.
Never keep the pump connected to the power supply unit for more
than 3 seconds in a row.
S.9
Workshop Manual Ed. 12-2011